From:stan waite Electronic:tamid2 -A- frontier.com
Subject:RE: Mikuni Race Carb...and girder fork parts Date:Tue Nov 2 18:46:38 2010
Response to:14603
HI I found the cap and slide in the box so you don't need them. What color do you wan't on the cyl. black or silver. I cant find anybody to brass plate the motor bolts in the short time we have left so they will be cad

----- ORIGINAL MESSAGE FOLLOWS -----
Hello,
I have a 28mm Mikuni race carb but I need a slide, the slide spring and the cap.
And the cable. Does anyone have these parts for me to buy?

I also need a lower tree for a '48 girder.

And could I get some advice on this:

I am thinking that since the original cable is held into the throttle slide with a
set screw that you should be able to do the same thing with the cable from the
mikuni even though it is a braided cable and not the solid wire of the stock carb
?