From:Mutt Electronic:pigstye13_A_aol.com
Subject:RE: RE: RE: RE: primary cover Date:Sun Dec 5 20:28:03 2010
Response to:14875
That's a "custom" cover. Good job for sure. The correct cover for your 48 is the cover that has the line that DOES NOT go all the way to the front. The line stops about 1/2 3/4" away from the edge. The cover with the line that goes all the way to the edge came out on the 1953 165.

----- ORIGINAL MESSAGE FOLLOWS -----
This the primary in question? It came on 1952 motor I bought. someone may have done this but if thats the case they sure did a good job because I can't see a thing in that skipped area.

----- ORIGINAL MESSAGE FOLLOWS -----
Bill, can ya post a picture of teh 3 you have? ----- ORIGINAL MESSAGE FOLLOWS -----


----- ORIGINAL MESSAGE FOLLOWS -----
How many primary covers styles carrying the part number 25407-47. I have six covers and three differnet styles on the rib. what is correct for 1948.

on this web site it says there are two. but Iam questioning that? I have one that has rib that come around the front back to about the front screws then no rib for about 2 inches w/p.n. 25407-47