From:Joep van der Steen e-mail:joepvdsteen-A-gmail.com
Subject:RE: RE: RE: RE: Brake side plate (rear) Date:Sat Feb 20 16:15:58 2016
Response to:21021
and thanks for this as well (got a 53 and later as well
it turns out)

----- ORIGINAL MESSAGE FOLLOWS -----
The 48-51 model rear hub, had 18 holes on the brake drum
flange and no weather ring sandwiched between the
sprocket
and the flange and had a 43 tooth sprocket

The 1952 is a one year only hub, just like the 48-51 but
had
a weather ring sandwiched between the sprocket and the
drum
before riveting.

The 53 and later, all model hubs had 18 holes with slots,
one
on each hole, on the brake side flange

----- ORIGINAL MESSAGE FOLLOWS -----
thanks, but how can you tell the hub is the correct one
as
well, just curious

----- ORIGINAL MESSAGE FOLLOWS -----
yep, that is the correct hub and brake plate for a 1951

----- ORIGINAL MESSAGE FOLLOWS -----
I guess this is the correct brake plate for the '51 model
?
this one has the curved sides, as I do have another one
which
is flat, bvut assume thats for the 52 and up one ?

thanks
Joep