From:Adam Wagner e-mail:adamwagner07-A-gmail.com
Subject:RE: RE: RE: transmission reassembly Date:Sat Dec 2 19:46:58 2017
Response to:22396
Nice. Got it to shift through the gears. Wasnt exactly
smooth but I'll guess that was because of the incomplete
setup. Thanks for the quick reply! -AW

----- ORIGINAL MESSAGE FOLLOWS -----
You are da man Mutt.

----- ORIGINAL MESSAGE FOLLOWS -----
Close the cases up with teh shifter and complete
transmission. install 3 or 4 case screws. Install the
kicker cover and kicker shaft and the 3 rear screws and
then
the shifter lever. You will need to turn the main drive
gear
sprocket while shifting thru the gears, or you will only
find
usually first and neutral

----- ORIGINAL MESSAGE FOLLOWS -----
I'm reassembling the transmission and everything goes
together just fine up until the step where the manual
says to
shift through the gears several times before moving on.
Mine
does not. Seems to be stuck at the ball retainer which
is
not stuck. Everything moves freely until I put it
together.
Gears and bearings turn just fine but the pawl does not
move
very much. Not sure what to expect here. Should I be
able
to manipulate the transmission through the gears manually
by
hand easily?

Thanks

Sent from IP Address: 73.26.108.46
Lookup 73.26.108.46

Reverse Telephone Lookup