Page 1 of 1

side stand

PostPosted: Thu Aug 08, 2019 8:07 pm
by stans48s
Who has a complete side stand for a 48 125? I see only the foot part. I need the complete stand with the part that attaches to the frame. Stan

Re: side stand

PostPosted: Fri Aug 09, 2019 6:55 am
by sureshotbob
I'd check with Duane Taylor check out his site under the parts heading or possibly Mutt might have a used one.

Re: side stand

PostPosted: Fri Aug 09, 2019 3:49 pm
by stans48s
I e mailed Daune Taylor he didn't reply. Stan

Re: side stand

PostPosted: Fri Aug 09, 2019 5:27 pm
by Enaud90
SIDE STAND STAN:

DUANE TAYLOR HERE.

I DON'T RECALL SEEING YOUR E-MAIL BUT THERE ARE A LOT OF THINGS I DON'T RECALL. (90 AND COUNTING ).
RE: KICKSTANDS FOR THE 48-50 MODELS.
I DID MAKE THOSE BUT WITH MODIFICATION AS THE ORIGINAL WAS PRETTY MISERABLE. THE MODIFICATION DOES NOT SHOW SO THEY LOOK THE SAME BUT PERFORM MORE LIKE THEY SHOULD.

I STILL HAVE 2 OR 3 LEFT BUT WILL NEED TO CHECK AND SEE IF THEY ARE REJECT OR GOOD USEABLE .

TRY THE E-MAIL THING AGAIN IF YOU WISH AND I WILL LOOK AT THE PART AND RESPOND. I DO NOT KNOW OF ANYONE ELSE THAT MADE THESE EARLY ONES. A DIFFICULT PART TO DO WELL.

DUANE TAYLOR

Re: side stand

PostPosted: Tue Aug 13, 2019 2:28 pm
by peteg59
I have a DT re-creation and can attest to its authentic and full factory stock appearance. Truly a work of art... :D