by 250_Sprint » Fri May 26, 2023 1:10 pm
Congratulation and enjoy the ride…
Replace the light bulb and see if it is just the bulbs element.
If not, consult the wire diagram in your service book to make sure the tail/brake lamp has all the wires connected.
As far as the horn goes, when bikes sit, the electric contacts electricity passes through can get oxidized, tarnished, and not allow electricity to flow. The contacts in the horn button may need to be cleaned in order to function properly.
Test the operation of the horn by putting 6V directly to the horn.
Again, refer to the wire diagram in the manual.
Keep us posted.