by Emerica1975 » Fri Oct 06, 2023 10:24 am
I finally got my carb to stop leaking gas. I thought I’d post a picture of it. I had to cut the intake and grind an angle on one side and Re weld.I’m not sure of the angle it’s at but it’s almost flat. I also put the bowl on 180 degrees different ( saw that’s how Mutt had his) and this gives you a little more room to work with. Thanks for the help.
- Attachments
-
- IMG_2123.jpeg (171.94 KiB) Viewed 14069 times
-
- IMG_2122.jpeg (179.84 KiB) Viewed 14069 times