Linkert carb conversion

[Emerica1975]

Your carb looks to be slightly angled. Or is that the angle the picture was taken from.

[Mutt]

3º

[Emerica1975]

I finally got my carb to stop leaking gas. I thought I’d post a picture of it. I had to cut the intake and grind an angle on one side and Re weld.I’m not sure of the angle it’s at but it’s almost flat. I also put the bowl on 180 degrees different ( saw that’s how Mutt had his) and this gives you a little more room to work with. Thanks for the help.