by Emerica1975 » Tue Dec 19, 2023 11:56 pm
I’m putting a 165st engine together. I have 2 different shifter shaft assemblies but one of the assemblies has a pawl that is a bit taller than the other one is 2.040 inches tall the other is 1.980 inches tall. I know it’s not much. Both shifter shafts have smooth ends. Are they for different model engines? My parts book only shows the difference being that one has a smooth end and one with splines on the end where the shifter shaft would go. The cases are 1959st. If that matters. Thanks!
- Attachments
-
- IMG_2256.jpeg (92.88 KiB) Viewed 21399 times