Clutch Basket?

Here's where to ask questions and get answers

Clutch Basket?

Postby sevens0n » Sun Jun 05, 2022 7:19 pm

Hello All...
Think I have found the major problem. The clutch basket rivets are loose from the driven sprocket. Is there a fix for this ? How are they done? Are they installed "Hot" ? Peened over ? anyone had this problem before?
Please Help...
Thanks in advance....
Attachments
DSC06988.JPG
DSC06988.JPG (130.63 KiB) Viewed 32443 times
DSC06986.JPG
DSC06986.JPG (117.55 KiB) Viewed 32443 times
As a prerequisite to mechanical aptitude, one must develop an instinctual understanding of the many aspects of Murphy's law.
sevens0n
 
Posts: 14
Joined: Sat Jun 04, 2022 2:16 am
Location: LaCrosse Wisconsin

clutch basket

Postby John » Sun Jun 05, 2022 10:22 pm

I had the same problem. I sent mine to Mutt and he tightened up the rivits.
John
 
Posts: 47
Joined: Thu Mar 07, 2019 11:11 am
Location: Western Pennsylvania

Re: Clutch Basket?

Postby Mutt » Mon Jun 06, 2022 8:30 am

I have the jig to install new rivets and peen them down all at once
cr1.jpg
cr1.jpg (32.17 KiB) Viewed 32397 times

cr2.jpg
cr2.jpg (31.54 KiB) Viewed 32397 times

cr3.jpg
cr3.jpg (32.09 KiB) Viewed 32397 times
Mutt
 
Posts: 452
Joined: Sat Jun 02, 2018 10:11 am

Re: Clutch Basket?

Postby sevens0n » Sat Jun 11, 2022 4:36 pm

Thanks Mutt...
That fixture looks to be the ticket. My clutch basket needs to be re-riveted. Could you do this for me?
PM me for details if you prefer.
Thanks again.
As a prerequisite to mechanical aptitude, one must develop an instinctual understanding of the many aspects of Murphy's law.
sevens0n
 
Posts: 14
Joined: Sat Jun 04, 2022 2:16 am
Location: LaCrosse Wisconsin

Re: Clutch Basket?

Postby Mutt » Sat Jun 11, 2022 4:49 pm

heres my email address pigstye13@aol.com
Mutt
 
Posts: 452
Joined: Sat Jun 02, 2018 10:11 am

Re: Clutch Basket?

Postby sevens0n » Thu Jun 30, 2022 12:39 pm

Hats off to Mutt!!
Sent the clutch basket to him. Came back likely better than new! Media blasted clean, new rivets, all tight and looking good.
Thank You!
As a prerequisite to mechanical aptitude, one must develop an instinctual understanding of the many aspects of Murphy's law.
sevens0n
 
Posts: 14
Joined: Sat Jun 04, 2022 2:16 am
Location: LaCrosse Wisconsin


Return to HELP with Restoration and Running

Who is online

Users browsing this forum: No registered users and 30 guests